Trailer tongue for tow hitch

This trailer tongue has been specifically designed to be used with cadMover to ensure maximum transmission of power between the powerhouse cadMover and your launching trolley. This tongue is especially useful for trailers and launching trolleys with multiple axles. It is so sturdy that the front axle of the 2-axle launching trolley will be lifted off the ground once connected to cadMover. This allows you to turn and steer a multi-axle launching trolley such as JetTrax 1x4 or JetTrax 1x6 just as easily as you would a single-axle launching trolley. Ingenius and effective!

Furthermore, this trailer tongue will allow you to use cadMover from a "safe distance" to launch your PWC for example. Due to the length of the trailer tongue cadMover will stay on dry land during the launching process which is good for the electronics inside. Complete towing and transport tasks in areas otherwise inaccessible!

Amazing: this trailer tongue is telescopic, meaning it can easily be made smaller and hidden underneath the launching trolley as well as be locked and secured in place. We use solid 20 mm stainless steel lock bolts / twistlocks to accomplish this. Once the trailer tongue is needed again simply get it out from underneath the trolley and you are ready to go - handy!

The trailer tongue itself is made of thick-walled aluminum square tube to be able to keep up with heavy transport goods, trailers or launching trolleys. This ensures that you are able to move and steer them without endangering the trailer tongue's stability or integrity. Its cross section is 70x70 mm with a wall thickness of about 4 mm. As with other products by cadKat we use a non-corrosive and sea water resistant alloy. The trailer tongue has additionally been anodized to further ensure a long life span and it is truly a worthy investment that not only serves its purpose to the fullest but will also continue to look great - even years after the purchase.